Description
The AIRBATT GR10-Air charge controller is a compact AC bridge regulator/rectifier with cooling fan and a charge control output to which a pilot lamp can be connected. The regulator was developed by us in cooperation with the company "Schicke Elektronik". The regulator is suitable for Rotax_AC alternators (2-wire) for 300W and allows the voltage to be adjusted to the battery via a potentiometer. When using LiFePO4 batteries, an additional OVP (Over-Voltage-Protection) is necessary or you could alternatively use our AIRBATT GR10 OVP-AIR.
With the GR10-Air charge controller, the control thyristors are switched near the voltage zero crossing. This reduces interference in the vehicle electrical system to a minimum.
Due to the attached cooling fan, the regulator can also be installed in difficult positions, such as behind or under the dashboard. The fan switches on by actuating the aircraft main switch.
Installation:
Due to the additionally installed fan, you can also install the AIRBATT GR10-Air outside an airflow or in the direct vicinity of a heat source. You can connect the generator, the battery, the main switch lead and the charge indicator lamp with the existing plug or alternatively with high-quality flat plugs 6.3 mm. The earth connection is made via the housing. A capacitor is not necessary.
For the installation method, please refer to the data sheet.
Technology: | Lead-acid battery |
Output current f. charge control lamp: | 20 mA |
Control voltage: | adjustable from 13.8 - 14.8 V lead-acid batteries |
Maximum generator power: | 300 W |
Over voltage protection: | No |
own consumption: | approx. 10 mA |
dimensions (lxbxh): | 105 x 64 x 55 mm |
Product weight: | 0,30 Kg |
Contents: | 1,00 pcs |